This page guides you to connect Kerlink Wirnet Station to The Things Stack.
This gateway’s technical specifications can be found in the official Kerlink documentation.
- User account on The Things Stack with rights to create Gateways.
- Kerlink Wirnet Station with Common Packet Forwarder installed and enabled and/or running firmware version
Note:Minimum CPF version tested is
Create a gateway by following the instructions for Adding Gateways. Choose a Gateway ID and set EUI equal to the one on the gateway.
Create an API Key with Gateway Info rights for this gateway using the same instructions. Copy the key and save it for later use.
All further steps will assume the gateway is available at
<gateway-ip>, The Things Stack is
<server-address>, gateway ID is
<gateway-id> and gateway API key is
<gateway-api-key>, please replace these by the values appropriate for your setup.
Note:Replace these with the values appropriate for your setup.
$ curl -sL 'https://raw.githubusercontent.com/TheThingsNetwork/kerlink-wirnet-firmware/v0.0.3/provision.sh' | bash -s -- 'wirnet-station' <gateway-ip> <server-address> <gateway-id> <gateway-api-key>
Please refer to Kerlink Wirnet provisioning documentation if more detailed up-to-date documentation is necessary.
Note:To avoid being prompted for
rootuser password several times, you may add your SSH public key as authorized for
rootuser on the gateway, for example, by
Packet forwarder logs are located at
/mnt/fsuser-1/lora/var/log/lora.log. You can access them by e.g.:
ssh firstname.lastname@example.org 'tail -f /mnt/fsuser-1/lora/var/log/lora.log'