This section contains instructions for connecting the Milesight UG56 LoRaWAN® gateway to The Things Stack using the Semtech UDP Packet Forwarder.
In the Packet Forwarder menu and General tab, click the little + button to create a new server.
In the server configuration options, check the Enable box.
Choose Semtech as the Type.
For the Server Address choose custom, and enter the address of The Things Stack deployment you are using. See Server Addresses section for help.
Choose the appropriate Port Up and Port Down values. These are both 1700 by default in The Things Stack.
Click Save to continue.
If your configuration was successful, your gateway will connect to The Things Stack after a couple of seconds.