# Troubleshooting

> This page lists solutions to common issues.

Source: https://www.thethingsindustries.com/docs/getting-started/3-try-starter-kit/troubleshooting/


This page lists solutions to common issues.

#### The end device does not join. What do I do now?

1. Make sure the gateway is connected and online. You can check this in the Gateway overview page in the The Things Stack console.
2. Check that the end device is at least 1-2 meters away from the gateway.
3. Wait for a few minutes before pressing the button.

#### What else can I do with end device downlinks?

The following table explains the available options for different types of downlinks

##### Controlling LED Behavoir

<div class="fixed-table">

| Byte Number | Value and Meaning                                                                                                                                                             |
| ----------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| 0           | 0x05                                                                                                                                                                          |
| 1           | 0x01 - Turn the LED ON; <br> 02 - Blink fast (100ms on, 100ms off); <br> 03 - Blink slow (100ms on, 1000ms off); <br> 04 - Turn the LED OFF.                                  |
| 2           | XX - Duration for the LED behavior. <br> Duration, [seconds] = XX \* 10. <br> If zero, do it until next LED related command is received <br> or the verify button is pressed. |

</br>
</div>

The mClimate Multipurpose button has a few other downlink options that you can explore. The full downlink reference can be found on [mClimate's documentation page](https://docs.mclimate.eu/mclimate-lorawan-devices/devices/mclimate-multipurpose-button-lorawan/mclimate-button-lorawan-device-communication-protocol).

