# Generic Node Sensor Edition

> ![Generic Node Sensor Edition](https://www.thethingsindustries.com/docs/hardware/devices/models/generic-node-se/generic-node-se.png) This section explains how …

Source: https://www.thethingsindustries.com/docs/hardware/devices/models/generic-node-se/


![Generic Node Sensor Edition](https://www.thethingsindustries.com/docs/hardware/devices/models/generic-node-se/generic-node-se.png)


This section explains how to get started with the [Generic Node Sensor Edition](https://www.genericnode.com/docs/sensor-edition/) (GNSE) on The Things Stack.

The Generic Node Sensor Edition comes with a pre-loaded application called [vanilla](https://www.genericnode.com/docs/applications/se-vanilla/) that showcases the device's functions and capabilities. This application utilizes a combination of the onboard components including the LEDs, button, buzzer, accelerometer, secure element, temperature sensor, and humidity sensor. The instructions on how to flash a new application onto the Generic Node SE can be found [here](https://www.genericnode.com/docs/getting-started/se-sw/env-setup/).

## Onboarding GNSE Using the QR Code

The Generic Node can be onboarded to The Things Stack using the QR code which is printed on the back of its enclosure.

In the **Register end device** page select the **Scan end device QR code** button.

![Register end device](https://www.thethingsindustries.com/docs/hardware/devices/models/generic-node-se/register-end-device.png)


The camera will start up and be ready to scan the QR code. To scan the device, bring the QR code close to the camera.

![Waiting for camera](https://www.thethingsindustries.com/docs/hardware/devices/models/generic-node-se/waiting-for-camera.png)


A window with information scanned from the QR code (like **Claim authentication code**, **JoinEUI**, **DevEUI** and **Brand**) should appear on your screen. If the data displayed is correct, select the **Apply** button.

![Found QR data](https://www.thethingsindustries.com/docs/hardware/devices/models/generic-node-se/found-qr-data.png)


To continue with the rest of the registration process you can choose either **LoRaWAN® Device Repository** or **manual registration**.

## Using the LoRaWAN Device Repository

The [LoRaWAN® Device repository](https://github.com/TheThingsNetwork/lorawan-devices) comprises over 800 end-device profiles, including the Generic Node Sensor Edition, which requires less information for registration with The Things Stack.

In the **End device type** section, under **Input Method** select **Select the end device in the LoRaWAN device repository**. Then select/enter the following values:

- End device brand: **The Things Industries**
- Model: **Generic Node (Sensor Edition)**
- Hardware Ver.: **1.1**
- Firmware Ver.: **1.1**
- Profile (Region): choose **EU_863_870** for Europe or **US_902_928** for US
- Frequency plan: choose the frequency plan appropriate for your region/country, for example, if you are live in Europe, choose **Europe 863-870 MHz (SF9 for RX2 - recommended)**.

![Settings for registration through device repository](https://www.thethingsindustries.com/docs/hardware/devices/models/generic-node-se/dev-rep-1.png)


- JoinEUI: pre-filled
- DevEUI: pre-filled (this is the secure element’s DevEUI)
- AppKey: select the **Generate** button.
- End device ID: you can continue with the pre-filled value or use any other unique value.

Select the **Register end device** button.

![Settings for registration through device repository](https://www.thethingsindustries.com/docs/hardware/devices/models/generic-node-se/dev-rep-2.png)


The device is now registered and you will be redirected to the **Overview** page of the device.

![GNSE overview page](https://www.thethingsindustries.com/docs/hardware/devices/models/generic-node-se/gnse-after-register.png)


## Manually

The Generic Node Sensor Edition also supports manual registration, but you need to find the required settings from the datasheet and ensure that they are entered correctly.

In the **End device type** section, under **Input Method** select **Enter end device specifics manually**.

Then select/enter the following values:

- Frequency plan: choose the frequency plan appropriate for your region/country, for example, if you are live in Europe, choose **Europe 863-870 MHz (SF9 for RX2 - recommended)**.
- LoRaWAN version: **LoRaWAN Specification 1.0.2**
- Regional parameters version: **RP001 Regional Parameters 1.0.2 revision B**

Select **Show advanced activation, LoRaWAN class and cluster settings** to expand the section. Ensure that the default selection is **Over the Air Activation (OTAA)**.

![Settings for manual registration](https://www.thethingsindustries.com/docs/hardware/devices/models/generic-node-se/manually-1.png)


Under **Provisioning information** enter the following settings:

- JoinEUI: **On the bottom of the device.**
- DevEUI: **On the bottom of the device.**
- AppKey: **select the Generate button.**

Select the **Register end device** button.

![Settings for manual registration](https://www.thethingsindustries.com/docs/hardware/devices/models/generic-node-se/manually-2.png)


The device is now registered and you will be redirected to the **Overview** page of the device.

![GNSE overview page](https://www.thethingsindustries.com/docs/hardware/devices/models/generic-node-se/gnse-after-register.png)


