# RAKwireless RAK2560 Sensor Hub

> ![RAK2560](https://www.thethingsindustries.com/docs/hardware/devices/models/rakwireless-rak2560/rak2560.png) The RAKwireless RAK2560 WisNode Sensor Hub is a …

Source: https://www.thethingsindustries.com/docs/hardware/devices/models/rakwireless-rak2560/


![RAK2560](https://www.thethingsindustries.com/docs/hardware/devices/models/rakwireless-rak2560/rak2560.png)


The RAKwireless [RAK2560 WisNode Sensor Hub](https://store.rakwireless.com/products/sensor-hub) is a modular sensor ecosystem consisting of the Sensor Hub Smart Datalogger and multiple pre-configured sensor probes. With pluggable, interchangeable probes, and the option to add third-party sensors to the mixture, the Sensor Hub is a suitable and versatile solution platform for various IoT applications where environmental monitoring is needed.

## Sensor Setup

To acquire the provisioning information and properly setup the sensor, you must download the **WisToolBox** App from the Play Store or the App Store on your phone.

After opening the app it will ask you to log in/create an account, but you can click on **Skip** in the top right if you don't wish to sign up.

Then press **Start**, select **NFC Activation** and follow the instructions for connecting to the device.

Once you reach the device menu, select the **LORA & LORAWAN PARAMETERS** tab. Open the **Global Settings** dropdown and make sure the **Join mode** and **Region** are set correctly.

Then open the **LoRaWAN keys, ID, EUI** dropdown and copy the **Device EUI**, **AppEUI** and **AppKey** and save them somewhere as they will be needed later for onboarding.

![Settings tab of the device.](https://www.thethingsindustries.com/docs/hardware/devices/models/rakwireless-rak2560/wistoolbox.png)


Finally, select the **Sensor Probe** tab up top and open the dropdowns for the sensors that are used. Here you can set the intervals or thresholds for transmitting data.

Make sure you enable the **Send uplink** toggle depending on which method you use.

## Onboarding to The Things Stack

The device can be onboarded using the **Device Repository** or **manually**.

> **Note:** The RAK2560 does not support onboarding with a QR code.


The [LoRaWAN® Device repository](https://github.com/TheThingsNetwork/lorawan-devices) comprises over 800 end-device profiles, including the RAK2560, which enables quick and easy registration with The Things Stack.

In the **End device type** section, under **Input method**, select either the **Select the end device in the LoRaWAN Device Repository** or **Enter end device specifics manually** option. The [Onboarding devices without QR codes](https://www.thethingsindustries.com/docs/hardware/devices/adding-devices/#onboarding-devices-without-qr-codes) section of the [Adding Devices](https://www.thethingsindustries.com/docs/hardware/devices/adding-devices/) guide explains this procedure in detail. Following details are RAK2560-specific:

- End device brand: **RAKwireless Technology Co.**
- Model: **RAK2560 Sensor Hub**
- Hardware Ver.: **1.0**
- Firmware Ver.: **1.0.0**

Then fill in the **Provisioning information**, which were found [in the first steps](#sensor-setup).

After configuring your device, select the **Register end device** button.

![Settings for registration through device repository](https://www.thethingsindustries.com/docs/hardware/devices/models/rakwireless-rak2560/rak2560-register.png)


If you prefer onboarding **manually**, in the **End device type** section, under **Input Method**, select the **Enter end device specifics manually** option. The [Manually adding devices](https://www.thethingsindustries.com/docs/hardware/devices/adding-devices/manual/) and [Over the Air Activation (OTAA)](https://www.thethingsindustries.com/docs/hardware/devices/adding-devices/manual/otaa/) guides explain this procedure in detail. Following details are specific to the RAK2560:

- LoRaWAN version: **LoRaWAN Specification 1.0.3**
- Regional parameters version: **RP001 Regional Parameters 1.0.3 revision A**

Then fill in the **Provisioning information**, which were found [in the first steps](#sensor-setup).

After configuring your device, select the **Register end device** button.

![Settings for manual registration](https://www.thethingsindustries.com/docs/hardware/devices/models/rakwireless-rak2560/manual-register.png)


