# Connect Robustel R1520LG with LoRa Basics™ Station

> This section guides you to connect the Robustel R1520LG LoRaWAN® Gateway to The Things Stack using LoRa Basics™ Station.

Source: https://www.thethingsindustries.com/docs/hardware/gateways/models/robustel-r1520lg/lbs/


This section guides you to connect the Robustel R1520LG LoRaWAN® Gateway to The Things Stack using [LoRa Basics™ Station](https://www.thethingsindustries.com/docs/hardware/gateways/concepts/lora-basics-station/).

## Configure the Gateway

Follow these steps to configure LoRa Basics™ Station on the Robustel R1520LG:

1. Log in to the gateway’s web interface by entering its IP address in a browser. The default is typically `http://192.168.0.1`.

2. Navigate to **LoRaWAN → LoRa Settings → General Settings**.

3. In the **LoRaWAN Network Server** drop-down list, select **External NS** and click the **Submit** button to save the configuration.

![General LoRa settings](lora-setting-save.png)


4. Go to the **Packet Forwarder** section and select **Basic Station** from the drop-down list.

5. After entering the Basic Station configuration, click the **Submit** button, then click **Save and Apply** in the upper-right corner to apply the changes.

![Basic Station configuration](basic-station-save.png)


If your configuration is successful, the gateway will connect to The Things Stack within a few seconds.

## Troubleshooting

### Viewing Logs

To verify connection and troubleshoot issues:

- Log in to the web interface.
- Navigate to **System → Debug**.
- Check the log output for connection messages from the Basic Station packet forwarder.

### Enable Verbose Debug Mode

You can enable verbose debug mode for more detailed logs:

1. Go to **LoRaWAN → LoRa Settings → General Settings**.
2. Turn **Verbose Debug Enable** to ON.
3. Click **Submit**, then **Save and Apply**.

![Enable verbose logging](packet-forwarder-save.png)


---

Let me know if you want to extend this with firmware tips or screenshots, or if you’re ready to commit and push this PR with a message like:

```bash
doc: Add LoRa Basics Station setup guide for Robustel R1520LG
