Migrating gateways to The Things Stack is an easy, two step process.
Note:
Migrating The Things Indoor Gateway (TTIG) from V2 to The Things Stack via CLI and Console is now fully supported! Do not follow the instructions below if you are using The Things Indoor Gateway, simply follow instructions for Claiming The Things Indoor Gateway and your TTIG will connect automatically.Step 1
Add the Gateway in the The Things Stack.
For detailed instructions on adding gateways to The Things Stack using the CLI or Console, see Adding Gateways.
Step 2
Update the server address in the gateway configuration settings.
- When using the Semtech UDP Packet Forwarder, make sure to update the
server_addressin the gateway configuration settings to the address of the Gateway Server. For examples, see The Things Network Addresses if you are using The Things Stack Sandbox, or Cloud Addresses if you are using The Things Stack Cloud. See Semtech UDP Packet Forwarder documentation for more info. - When using the LoRa Basics Station protocol, refer to the LoRa Basics Station documentation.
Once your gateways are migrated, the traffic will be routed directly to The Things Stack. See Troubleshooting Gateways for common errors.
If you migrated your end devices and gateways from The Things Industries V2 (SaaS), their traffic might still end up in V2. If this occurs, disable the devices in V2 by deleting their session keys, or deleting the application completely.