Models
This subsection contains comprehensive instructions for connecting some of the popular LoRaWAN® devices to The Things Stack.
Arduino MKR 1310
This section will help you get started with using The Arduino MKR WAN 1310 on The Things Stack.
Browan TBMS100 Motion Sensor
The Browan TBMS100 Motion Sensor is a PIR motion sensor designed to detect occupancy or movement in homes or buildings for security and efficient facility management. It helps optimize the utilization of spaces like desks, conference rooms, and bathrooms.
Dragino LHT52
The Dragino LHT52 is a temperature & humidity sensor. It features a Type-C port for connecting to accessories, such as an external temperature sensor for example.
Elsys ERS Lite
The Elsys ERS Lite is an indoor environment sensor for measuring temperature and humidity.
Generic Node Sensor Edition
This section explains how to get started with the Generic Node Sensor Edition (GNSE) on The Things Stack.
Heltec HTCC-AB01
The Heltec HTCC-AB01 (V2) is a development board based on the ASR6052, which has an integrated PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262 transceiver. It features Arduino compatibility, an ultra low power design and an onboard SH1.25 for lithium batteries or solar panels.
In this guide, we will set this module up for usage in the Arduino IDE and use an example code to connect it to The Things Stack.
LILYGO LoRa32
The LILYGO LoRa32 V2.1_1.6 is a development board with an ESP32 and a Semtech SX1276 transceiver. It features an OLED screen, Micro SD card slot and a JST GH for connecting a Li-Po battery.
In order to program the board we need to make use of of the RadioLib library. This is a universal Arduino library created for radio modules (such as LoRa).
We will set up the Arduino IDE first, after which we will use an example code to connect it to The Things Stack.
Milesight EM300-TH
The Milesight EM300-TH is an environment sensor suitable for monitoring indoor and outdoor temperature and humidity. It can be widely used in office areas, greenhouses and other environments.
Moko Smart LW001-BG Pro
The Moko Smart LW001-BG Pro is a LoRaWAN tracker. It integrates GPS positioning, Bluetooth positioning and WiFi positioning and supports multiple detection methods, such as anti-demolition alarm, motion detection and vibration detection.
The device supports a variety of working modes as well and is suitable for most tracking applications.
Quectel KG200ZABTB
The Quectel KG200ZABTB is a high-performance LoRa module launched by Quectel, which provides ultra-low power consumption and long-range wireless transmission applications.
RAKwireless RAK2560 Sensor Hub
The RAKwireless RAK2560 WisNode Sensor Hub is a modular sensor ecosystem consisting of the Sensor Hub Smart Datalogger and multiple pre-configured sensor probes. With pluggable, interchangeable probes, and the option to add third-party sensors to the mixture, the Sensor Hub is a suitable and versatile solution platform for various IoT applications where environmental monitoring is needed.
Seeed Studio S210x Series
The Seeed Studio S210x Series offers users industrial long-distance data acquisition via LoRaWAN. This series is suitable for a wide variety of different industries such as smart agriculture, smart buildings and industrial control.
Seeed Studio Wio-E5
The Seeed Studio Wio-E5 module is embedded with the ST system-level package chip STM32WLE5JC, ARM Cortex M4 ultra-low power MCU, and long range SX126X transceiver. It supports EU868, US915 and more frequency bands. It is suitable for wireless sensor networks and other battery-powered IoT devices that require low power consumption and long transmission range.
Sensative Strips
The Sensative Strips is a family of sensors with multiple purposes. It contains devices such as humidity, temperature, light (lux), and magnetic open/close sensor.
SG Wireless F1 Starter Kit
The SG Wireless F1 Starter Kit is an Arduino form factor board based on the F1 Smart Module, which features Wi-Fi, Bluetooth LE, LTE and LoRaWAN connectivity. It boasts a nano-SIM holder, micro-SD card holder and a li-po battery connector.
The Things Node
In this quickstart, you will learn how to register your Things Node with The Things Stack and program it with the Arduino software for activating with The Things Stack.
The Things Uno
This section will help you get started with using The Things Uno on The Things Stack.