This guide can help you build your own LoRaWAN gateway using a Raspberry Pi and an iC880A LoRa concentrator board, and run LoRa Basics™ Station on it.

The Browan Minihub Pro is a low-cost LoRaWAN® gateway with a WiFi backhaul, which supports both Semtech UDP Packet Forwarder and LoRa Basics™ Station.

This page guides you to connecting the Cisco Wireless Gateway for LoRaWAN® to The Things Stack.

Option Wireless Technology’s CloudGate is the carrier-approved IoT solution platform that delivers device connectivity, security and processing power for global IoT applications. This guide will help you set up the CloudGate gateway to communicate over The Things Stack using LoRa Basics Station.

COTX product portfolio consists of IoT modules, LoRa gateways, node devices and all-in-one solutions. They offer high quality radio performances and carrier-grade security. COTX offers a few gateway versions, and instructions for all of them are available in the following sections: COTX X1 (Lite) Gateway COTX X3 Gateway COTX X5 Gateway

The Dragino LPS8N is a LoRaWAN® indoor gateway based on the open-source OpenWrt Linux operating system. Its hardware is built around the SX1302 LoRa Core™ Digital Baseband Chip and the SX1250 LoRa Core™ Multi-band Sub-GHz RF Front End. The LPS8N provides ten programmable parallel demodulation paths. The gateway can be connected to the internet using Ethernet, WiFi, or optional Cellular (3G/4G) connectivity. It supports the EU868, IN865, US915, AU915, AS923, and KR920 frequency bands.

The Kerlink Wirnet iStation is an outdoor LoRaWAN® gateway that represents an evolution of the legacy Kerlink Wirnet Station gateway. It offers cellular (4G with 3G/2G fallback) and Ethernet backhauls, as well as fully integrated internal GPS, 4G and LoRa antennas.

Warning: Kerlink announced the Product End of Life in January 2020 for Wirnet Station, so using Kerlink Wirnet iStation is highly recommended. The Kerlink Wirnet Station is a robust and highly reliable outdoor LoRaWAN gateway. It was the first commercially available LoRaWAN® gateway on the global market. It offers Ethernet and cellular (3G/2G) backhauls.

The Laird Sentrius™ RG1xx is a secure, scalable, robust LoRaWAN-Enabled Gateway that supports Wi-Fi, Ethernet, and LTE backends. This page contains information about connecting the Laird Sentrius™ RG1xx to The Things Stack.

The MikroTik KNOT LR8/LR9 kit is a universal device with exceptional connectivity options and protocol support. It is an IoT Gateway which can use ethernet or LTE-M (also known as CAT-M) technology as the gateway backhaul.

The LtAP LTE kit is a compact weatherproof wireless access point with a built-in cellular modem that supports 4G (LTE) connectivity. Connect to the LtAP’s built-in high power 2.4 GHz 802.11B/G/N wireless and access the LTE network from your phone or any other wireless device. The LtAP LTE kit also has one Gigabit Ethernet LAN port for wired devices.

MikroTik Routerboard wAP LoRa8 kit is a LoRaWAN® gateway that contains a pre-installed UDP packet forwarder and an outdoor weatherproof wireless access point with 2.4 GHz WLAN interface and Ethernet port that could be used as a backend. This guide shows how to connect this gateway to The Things Stack.

The Milesight UG56 is a robust 8-channel indoor LoRaWAN® gateway. Adopting SX1302 chip and high-performance quad-core CPU, UG56 supports connection with more than 2000 nodes. This page contains information about connecting the Milesight IoT UG56 LoRaWAN gateway to The Things Stack.

The Milesight UG65 is a high-performance 8-channel LoRaWAN® gateway that offers reliable connectivity for industrial applications. This page contains information about connecting the Milesight IoT UG65 LoRaWAN gateway to The Things Stack.

The Milesight UG67 is a robust outdoor LoRaWAN® gateway designed for outdoor deployments. Powered by the SX1302 LoRa chip and a high-performance quad-core CPU, the UG67 can support connectivity with over 2000 nodes. This page contains information about connecting the Milesight IoT UG67 LoRaWAN gateway to The Things Stack.

The Milesight UG85 industrial LoRaWAN gateway delivers tenacious connection over network with full-featured design such as automated failover/failback, extended operating temperature, dual SIM cards, hardware watchdog, VPN, Gigabit Ethernet and beyond. This page contains information about connecting the Milesight IoT UG85 LoRaWAN gateway to The Things Stack.

The Milesight UG87 industrial LoRaWAN gateway delivers tenacious connection over network with full-featured design such as automated failover/failback, extended operating temperature, dual SIM cards, hardware watchdog, VPN, Gigabit Ethernet and beyond. This page contains information about connecting the Milesight IoT UG87 LoRaWAN gateway to The Things Stack.

MOKOSMART’s 8 channel MKGW2 gateway is embedded with Semtech’s high performance multi-channel transceiver SX1301/SX1257 and MTK platform. It is for indoor use and is easy to install. Requirements User account on The Things Stack with rights to create gateways. MOKOSMART MKGW2-LW connected to the internet via Ethernet or WiFi. (For Ethernet and WiFi settings, see sections 5 and 6 of the user manual) Registration Create a gateway by following the instructions.

The MultiTech MultiConnect® Conduit™ is a configurable, scalable cellular communications gateway for industrial IoT applications. This guide will help you set up the Multitech Conduit gateway to communicate over The Things Stack.

The MultiTech MultiConnect® Conduit™ is a configurable, scalable cellular communications gateway for industrial IoT applications. The technical specifications of this Conduit can be found in the software guide in the official documentation page. This guide will help you set up the Multitech Conduit mLinux gateway to communicate over The Things Stack.

This page guides you to connect NASys LoRaWAN® Outdoor Gateway to The Things Stack.

Peplink’s Balance 20X is an SD-WAN branch router with an option to add LoRaWAN® gateway functionality using a LoRaWAN FlexModule Mini. The Balance 20X delivers excellent routing throughput with an embedded cellular modem, making it an easy-to-use, all-in-one router for indoor deployments. Its installation and configuration are made simple through a web-based user-friendly interface. The gateway supports both LoRa Basics™ Station and the Semtech UDP Packet Forwarder. Keep in mind that using Lora Basics™ Station is preferred.

The RAK7240 (WisGate Edge Prime) is a macro outdoor LoRaWAN® gateway, ideal for large scale deployments. It is highly reliable, customizable, and offers a WiFi, LTE and Ethernet backhaul. This guide will help you set up the RAK7240 gateway to communicate over The Things Stack. Configuring and connecting RAK7249, RAK7268 and RAK7258 gateways to The Things Stack should be identical as for the RAK7240.

This page guides you to connect Tektelic Kona Micro IoT LoRaWAN® Gateway to The Things Stack.

This page will guide you through connecting The Things Indoor Gateway to The Things Stack.

This page will guide you through connecting The Things Indoor Gateway Pro to The Things Stack.

This page guides you to connect The Things Kickstarter Gateway to The Things Stack.

This guide contains instructions for connecting The Things Outdoor Gateway to The Things Stack.

The Wifx L1 is a robust and professional grade outdoor LoRaWAN® gateway in an ultra compact form factor, designed and assembled in Switzerland. It is the successor of the Wifx LORIX One. This page will guide you through the steps required to connect the gateway to The Things Stack.

The LORIX One is a robust and professional grade outdoor LoRaWAN® gateway in an ultra compact form factor, designed and assembled in Switzerland. This page will guide you through the steps required to connect the gateway to The Things Stack.